Details

• Updated: motion sensor performance 
•     Updated: pairing and connection performance of headset when used with Jabra Link 400
o Connection updated so it looks for last connected device if the headset is powered on, without being docked in the base.
•     Updated: general audio level improvements 
•     Updated: battery voice prompt and tone behaviors 
•     Fixed: volume level adjustments with certain mobile phones 
•     Fixed: secondary headset may disconnect in conference mode 
•     Fixed: rare scenario where the headset would not reboot after an OTA firmware update using Jabra Link 400 
•     Fixed: easy pairing not working if set to Always in Computer audio 
•     Fixed: rare volume sync issue on Linux 
•     Performance and stability improvements

Details

• Fixed: reboot when receiving an incoming Microsoft Teams call

Details

• Performance and stability improvements

Details

• New feature: added support for Jabra Link 400 for the Jabra Engage 65/75 headset top to be connected
• New feature: added support for Jabra Engage 55
• New feature: Jabra Engage 65/75 headset can be firmware updated Over-The-Air via Jabra Link 400

Details

• Fixed: a rare issue causing the base to reboot when used with Mitel Telepo
• Performance and stability improvements
  
   

Details

• New features:
• Supports data analytics integrations for the following:

   • DECT density and error logging*

   • Headset interaction logging*

   • Simple speech analytics*

   • Audio exposure logging*

   • Noise level guidance*
• New feature: Call begin tone. Option to change default setting from “Call initiated” to “Audio initiated” so a tone is played in the headset when the audio link to the base is established**.
• Fixed: the headset does not wake up from powernap on an incoming call.
• Fixed: secondary headset docked in a base that are in powernap is not paired correctly the base in certain cases
• Updated: headset does not repair each time when connected to the base if easy pairing is set to on.   
• Performance and stability improvements

*available later in 2020 in Jabra Xpress and Jabra SDK.
**requires that Audio announcements are set to Voice or Tones.

Details

• New feature: Superior and safe (Intellitone 2.0, Speech Level Normalization, Intelligent Acoustic Shock Protection) read more in the technical white paper: Safetone™  located here: www.jabra.com/support-page/technical-whitepapers
• Fixed: USB dropout experienced on some thin clients
• Fixed: audio dropout when used for calls with Microsoft Teams
• Performance and stability improvements

• Fixed: USB connectivity stability
• Performance and stability improvements

*Note: Supported by Jabra Direct 2.0 (version 4.x or later). Download at www.jabra.com/direct

Details

• New feature: Added ability to use headset as a wired headset. Press and hold either the Mute, Volume up, or Volume down button, while simultaneously plugging the headset into a USB port.
• New feature/Jabra Engage 75: Added options to “Audio protection” setting on the base > Advanced menu.
  
• New feature: Added “Off” option for “Audio announcements” setting.
• New feature/Jabra Engage 75: Added “Ringtone in headset” setting to the base > Advanced menu.
• New feature/Jabra Engage 75: Added ability to reconnect to a mobile device from the base.
• New feature/Jabra Engage 75: Added ability to use the base name as the Bluetooth device name.
• Updated/Jabra Engage 75: Added “Product information” details on the base > Advanced menu.
• Updated: Improved call handling for multiple calls from the base and headset when not using an EHS adapter.
• Updated: Improved pairing of base with headset after a Power Nap or reboot.
• Fixed: Reduced time needed to establish an audio link.
• Fixed/Jabra Engage 75: Optimized display performance.
• Fixed: Uncommon issues when docking headset to end calls.
• Fixed: Improved mute feature in various scenarios.
• Performance and stability improvements.

Details

• Fixed: echo issues observed with some desk phones when connected via 4-wire
• Fixed: missing ringtone for certain mobile phones
• Performance and stability improvements

Details

• Resolved an issue sometimes seen when used with Elux 4.
• Resolved an issue when using IQ mode with Panasonic phones.
• Resolved an audio issue (metallic noise) when used via USB with Mitel 6940 phones.

Details

• Change name of Text Language pack to "Global" (instead of "EMEA/APAC")
• ”Current Call feature” is not working once you merge the call.
• Solved a challenge where audio sometimes dropped out every 20 seconds on secondary USB, if muted.
• Solved a reboot challenge when docking headset to end merged call.
• Solved an issue where the volume level was not always preserved for next call.
• Updated Caller ID – to show name of phone in case no Caller ID available (instead of ”Unknown Caller”).
• Improved volume synchronization with Bluetooth devices.
• Solved an issue where sidetone was still enabled for desk phone even if sidetone was disabled.
• Improved Audio experience when handling multiple calls on multiple phones and modes.
• Updated User Equalizer (bass, treble and normal) to take immediate effect if changed during call.
• Improvements for headset mute when used on Citrix platform.
• Added the missing ringtone when used with Jabra GN1000 hooklifter.
• Improvements to Desk phone setup with Electronic Hooklifters.

Details

• Stability improvements.
• Minor bug fixes.

Details

• First public release